IPSWICH, LOCKYER VALLEY, BRISBANE
0431 478 631

Rheem Stainless Steel Electric Hot Water Unit Single Element 315Ltr 3.6Kw Supply & Install From

Category Tag
Rheem Stainless Steel Electric Hot Water Unit Single Element 315Ltr 3.6Kw Supply & Install From
Rheem Stainless Steel Electric Hot Water Unit Single Element 315Ltr 3.6Kw Supply & Install From - Image 2

Product Description

Step One
Step Two
Step Three

Step One

  • Select Package *

  • *

    Our Base Install Package is actually a full upgrade service, bringing your hot water system completely up to current Australian Standards. Includes:
    All new connecting valves and pipework upgraded to meet current plumbing regulations
    Installation of new Duo valve, Pressure Limiting Valve (PLV), Tempering valve, and Expansion Control Valve (ECV)
    New ripple paver or poly pizza base under the unit for a stable, compliant platform
    Like-for-like electrical reconnection by a licensed tradesperson
    Removal and disposal of your existing hot water system
    QBCC Form 4 submission for full compliance documentation
    This package ensures your system is installed safely, efficiently, and in line with all modern standards — not just replaced.

  • *

    Our Electrical Upgrade Package includes everything in the Base Install (Full Gold Upgrade) plus additional electrical work to bring your system fully up to code. Includes:
    All items listed in the Base Install Package
    Extension of electrical cable (up to 1 metre) at the hot water system as required
    Installation of a new local isolator switch for safety and compliance
    Installation of a new RCBO safety switch at the switchboard
    This upgrade is designed for systems that require additional electrical work beyond a standard like-for-like reconnection. Please see our FAQ section below to find out when this upgrade is necessary.

  • *

    Perfect for properties upgrading from gas hot water to a new electric or heat pump system. This package covers everything needed to safely convert your system to electric power in compliance with current standards. Includes:
    All items in the Base Install (Full Gold Upgrade) Package
    Cap off and decommission of gas system where required
    Installation of a new dedicated electrical circuit (up to 10 m from the hot water system to the switchboard)
    Full connection and commissioning of the new electric or heat pump system in the same location as the existing gas unit
    Testing and certification for electrical and plumbing compliance
    Please note: Final quoting will confirm any additional electrical costs if a longer or more complex cable run is required.

  • *

    For when you need to move your hot water system to a new location on your property. Ideal for relocating units from inside the home to a compliant external position. Includes:
    All items in the Base Install (Full Gold Upgrade) Package
    Plumbing extensions and modifications to relocate the system (up to 6 metres)
    Electrical extension work with installation of a new RCBO safety switch and local isolator to current standards
    Removal and disposal of the old system
    Full testing and certification for plumbing and electrical compliance
    This package ensures your relocated system is installed safely, neatly, and in full accordance with Australian Standards.
Next

Step Two

  • Select Install Timing *

  • *

    Installation within our standard scheduling window (up to 10 business days).

  • *

    Faster scheduling (target within 5 business days). No price increase or decrease

  • *

    Same-day installation when ordered and paid before the daily cutoff 8am.
PreviousNext

Step Three

  • Accept Terms and Conditions *

  • *

    By proceeding with your purchase, you acknowledge that you have read and agree to the Ipswich Hot Water Supply & Installation Terms and Conditions. All installations are subject to site inspection, and additional costs may apply if extra work is required beyond the standard installation scope. Ipswich Hot Water reserves the right to cancel or refund any order where site conditions differ from those selected or described at the time of purchase.
Previous

Product total

Options total

Grand total

For purchase and delivery you can reach us via phone or email.
CALL NOW: 0431 478 631
CONTACT US

Product Information

Product Description

Features:
  • Dual handed cold water connections, a hot water connection at the top of the water heater.
  • Stainless steel cylinder and water fittings
  • No anode — saves on maintenance and service costs
  • Money saving — designed for off-peak energy rates.
  • Made in Australia
Rheem Stellar Stainless Steel water heaters are not recommended for installation in some areas. Refer to the Stainless Steel Suitability Map for your state to see if Stainless Steel is suitable for your home.
Warranty:
  • 12 years cylinder warranty*
  • 3 years labour on cylinder*
  • 1 year parts and labour warranty*

Features & Benefits
• Stainless steel cylinder and water
fittings resist corrosion for longer,
extending product life
• Dual handed fittings located on the
front of the water heater
• Twin element model- 4A2250
• 19% better performance than MEPS
reduces energy use, saving money
• Up to 42% lighter2 – for easier
handling and installation
• Australian made
• 12 year cylinder warranty1

FAQ's

What is the process when purchasing a hot water system online?
Please visit our What to Expect page for more detailed information on our process.

When is an electrical upgrade needed?
An electrical upgrade is required if your existing hot water system’s wiring doesn’t reach the new unit location, if your current supply is undersized for a modern heat pump, or if your switchboard still uses old-style fuses instead of safety switches. In these cases, new cabling, an isolator switch and a safety switch (RCBO) are installed to ensure the system meets today’s electrical and safety standards.

Why a full upgrade is required
When installing a new hot water system, the plumbing must be brought up to current Australian Standards to ensure the installation is safe, compliant, and eligible for warranty. A full upgrade typically involves replacing valves, drain lines, and pipework insulation, and making sure the system meets pressure and temperature safety requirements.
In Queensland, plumbers are required to submit a QBCC Form 4 for every hot water installation. This certifies that the work complies with the Plumbing and Drainage Act. Without these upgrades, the new system may not be covered by the manufacturer’s warranty, and safety devices designed to protect against scalding or excess pressure may not function correctly.
Upgrading ensures:
Warranty protection for your new unit
Compliance with QBCC and Australian Standards
Safety for your household with correctly installed valves and drainage
Long-term reliability by replacing outdated or non-compliant parts

What area do you service?
Please check your property is located within our Service Area using the map below.

Service Area

Trusted by Local Homeowners

Related Products

Related products