IPSWICH, LOCKYER VALLEY, BRISBANE

Everhot 280L R290 Heat Pump Supply & Install

Category Tag

Product Description

Step One
Step Two
Step Three

Step One

  • Select Package *

  • *

    Our Base Install Package is actually a full upgrade service, bringing your hot water system completely up to current Australian Standards. Includes:
    All new connecting valves and pipework upgraded to meet current plumbing regulations
    Installation of new Duo valve, Pressure Limiting Valve (PLV), Tempering valve, and Expansion Control Valve (ECV)
    New ripple paver or poly pizza base under the unit for a stable, compliant platform
    Like-for-like electrical reconnection by a licensed tradesperson
    Removal and disposal of your existing hot water system
    QBCC Form 4 submission for full compliance documentation
    This package ensures your system is installed safely, efficiently, and in line with all modern standards — not just replaced.
  • *

    Our Electrical Upgrade Package includes everything in the Base Install (Full Gold Upgrade) plus additional electrical work to bring your system fully up to code. Includes:
    All items listed in the Base Install Package
    Extension of electrical cable (up to 1 metre) at the hot water system as required
    Installation of a new local isolator switch for safety and compliance
    Installation of a new RCBO safety switch at the switchboard
    This upgrade is designed for systems that require additional electrical work beyond a standard like-for-like reconnection. Please see our FAQ section below to find out when this upgrade is necessary.
  • *

    Perfect for properties upgrading from gas hot water to a new electric or heat pump system. This package covers everything needed to safely convert your system to electric power in compliance with current standards. Includes:
    All items in the Base Install (Full Gold Upgrade) Package
    Cap off and decommission of gas system where required
    Installation of a new dedicated electrical circuit (up to 10 m from the hot water system to the switchboard)
    Full connection and commissioning of the new electric or heat pump system in the same location as the existing gas unit
    Testing and certification for electrical and plumbing compliance
    Please note: Final quoting will confirm any additional electrical costs if a longer or more complex cable run is required.
  • *

    For when you need to move your hot water system to a new location on your property. Ideal for relocating units from inside the home to a compliant external position. Includes:
    All items in the Base Install (Full Gold Upgrade) Package
    Plumbing extensions and modifications to relocate the system (up to 6 metres)
    Electrical extension work with installation of a new RCBO safety switch and local isolator to current standards
    Removal and disposal of the old system
    Full testing and certification for plumbing and electrical compliance
    This package ensures your relocated system is installed safely, neatly, and in full accordance with Australian Standards.

Step Two

  • Select Install Timing *

  • *

    Installation within our standard scheduling window (up to 10 business days).
  • *

    Faster scheduling (target within 5 business days). No price increase or decrease
  • *

    Same-day installation when ordered and paid before the daily cutoff 8am.

Step Three

  • Accept Terms and Conditions *

  • *

    By proceeding with your purchase, you acknowledge that you have read and agree to the Ipswich Hot Water Supply & Installation Terms and Conditions. All installations are subject to site inspection, and additional costs may apply if extra work is required beyond the standard installation scope. Ipswich Hot Water reserves the right to cancel or refund any order where site conditions differ from those selected or described at the time of purchase.

Product total

Options total

Grand total

For purchase and delivery you can reach us via phone or email.

Product Information

Product Description

Everhot

Everhot 280L Heat Pump Promo 2024 (youtube.com)

Everhot 280 litre Heat Pump is an affordable, high
efficiency water heater that’s made right here in
Australia. It’s an ideal replacement for a similar sized
electric water heater.
Suitable for medium to large families up to 6 people,
this high performance water heater can work
during the day or night as it extracts heat from the
surrounding air to heat the water; providing a reliable,
efficient, and sustainable way to reduce your hot water
energy consumption.

Warranty

Spare Parts & Labour – Domestic Use 12 Months
Tank Warranty – Domestic 5 Years
Notes *See the Everhot warranty at www.reece.com.au/Everhot The warranty periods above apply to installations in a single-family domestic dwelling only. For further details, please refer to the Owner’s Guide available in the Downloads tab on this page. Without limiting the above periods, a 5-year whole-of-product warranty applies where a rebate has been received under Solar Victoria’s Solar Homes Program for installations from 1 July 2023.

The Everhot 280 litre Heat Pump is an affordable, high efficiency
heat pump that’s made right here in Australia. It is an energy efficient
alternative as it uses the heat from the surrounding air to heat water
and provides a reliable, efficient, and sustainable way to reduce your
water heating energy consumption.
IDEAL
CHOICE
FOR LARGER
FAMILIES
Reduced energy consumption Coefficient of Performance (COP)1 of 4.9 @ 19°C
makes it a highly efficient water heater to help reduce energy consumption.
Ultra Low GWP The R290 refrigerant has a Global Warming Potential (GWP) of less
than <3. The lower the GWP the better it is for the environment and what is released
into the atmosphere.
Energy efficient Can save up to 73% on your water heating energy consumption
compared to an electric water heater in Zone 32. Eligible for STCs (may be eligible for
additional incentives in some states).
Faster water heating Advanced wrap around microchannel heating technology
provides uniform and faster water heating when compared to coil-around-tank technology.
LED touchscreen controller Provides optimum visibility, product performance
information and user-friendly operation with timer function.
EVERHOT 280L
MODEL SPECIFICATIONS
Storage capacity
Rated Heat Pump power input @ 240 V
Element heating unit rating @ 240 V
Maximum rated power input @ 240 V
Recommended electrical circuit
Coefficient of Performance (@19°C)1
Noise Level @ 1 metre
UNIT
Litres
Watts
1366287 /1366288 (Blue Anode)
280
609
Watts
Watts
Amps
COP
dB(A)
People per household
2400
3100
15
4.9
47
Up to 6
*Warranty Periods: 5 years supply on cylinder. Applies to a single-family domestic dwelling only. Conditions apply. Warranty limits regarding water chemistry. Harsh water regions – the Everhot warranty may not apply if the
water heater is connected to a water supply which has a Total Dissolved Solids content >2500mg/L; is scaling with a Saturation Index >+0.8, or; is corrosive with a Saturation Index <-1.0. 1.The COP of 4.9 is the average value
in the AS/NZS5125 performance test at 19°C ambient temperature over the entire heat-up process. Note that the actual COP of the product at any given time will be impacted by several factors, including the ambient and
cold-water inlet temperatures at the place of installation and time of day/season of operation. 2.Energy savings of up to 73% are based on Australian Government approved TRNSYS simulation modelling using a medium load
in Zone 3 and apply when replacing an electric water heater of similar size. Everhot® is a Registered Trade mark of Rheem Australia Pty Ltd. Materials and data are subject to change without notice. Current as at April 2024.
Designed for Australian conditions, the Everhot range is made
exclusively for Reece by Rheem Manufacturing.

 

 

FAQ's

What is the process when purchasing a hot water system online?
Please visit our What to Expect page for more detailed information on our process.

When is an electrical upgrade needed?
An electrical upgrade is required if your existing hot water system’s wiring doesn’t reach the new unit location, if your current supply is undersized for a modern heat pump, or if your switchboard still uses old-style fuses instead of safety switches. In these cases, new cabling, an isolator switch and a safety switch (RCBO) are installed to ensure the system meets today’s electrical and safety standards.

Why a full upgrade is required
When installing a new hot water system, the plumbing must be brought up to current Australian Standards to ensure the installation is safe, compliant, and eligible for warranty. A full upgrade typically involves replacing valves, drain lines, and pipework insulation, and making sure the system meets pressure and temperature safety requirements.
In Queensland, plumbers are required to submit a QBCC Form 4 for every hot water installation. This certifies that the work complies with the Plumbing and Drainage Act. Without these upgrades, the new system may not be covered by the manufacturer’s warranty, and safety devices designed to protect against scalding or excess pressure may not function correctly.
Upgrading ensures:
Warranty protection for your new unit
Compliance with QBCC and Australian Standards
Safety for your household with correctly installed valves and drainage
Long-term reliability by replacing outdated or non-compliant parts

What area do you service?
Please check your property is located within our Service Area using the map below.