Posted on

Rinnai Hot Water System: Troubleshooting Guide

Is there no hot water coming out of your Rinnai hot water system, or are you struggling with terrible water pressure? Follow the troubleshooting techniques below to resolve the issues before scheduling a service call.

Low Hot Water Pressure

Inspect the cold and hot water taps. Is there a problem with the pressure in all of the fixtures or just one? For example, clogged pipes, a leaking hot water system, a damaged pressure regulator, or sediment accumulation in the water heater can all cause low hot water pressure. Don’t put up with hot water issues any longer; give us a call today, and we’ll get it fixed in no time so you can enjoy scalding hot showers once more!

It’s Either Too Hot or Too Cold In The Water

A defective thermostat, heating element, or tempering valve could cause excessively hot or cold water. We can inspect the unit and determine the source of the problem, allowing us to resolve it swiftly.

Is it Possible That You’re Using Too Much Hot Water?

Showering or using a lot of water in appliances might deplete the hot water supply. To reduce the pressure on your hot water system, review your water usage and consider taking shorter showers. If the situation persists, you should think about replacing your water heater.

Pooling Water Around The Hot Water Unit

A leaky cylinder could be the cause of a massive amount of water around the water heater. Please turn off the gas or power, as well as the water heater, and contact us for help.

Signs That Your Hot Water System Is In Need Of Repair

  • Your hot water has turned brown.
  • Your water heater makes popping, gurgling, or bubbling noises.
  • The pilot light has gone out.
  • It’s either too hot or too cold in the water.
  • If your Rinnai unit is beeping, there could be a cylinder leak that has to be fixed right away.
  • You’re constantly running out of hot water.
  • There is a lack of hot water pressure in your home.

Rinnai’s Local Hot Water Experts

Our team can handle any installation, repair, or maintenance needs you may have, thanks to their extensive experience. Furthermore, our team has the knowledge and expertise to work on a wide range of designs, and we can help our clients find the most precise solutions for their specific needs at work or home.

Give us a call if you have any queries about the Rinnai hot water heater or require repair services.

Posted on

Hot Water System: Solar Vs Gas or Electric

Are you wanting to restore or upgrade your existing hot water system but aren’t sure which system is right for you? A quarter of the average Australian household bill is spent on hot water systems. Given that this is one of the most costly appliances to operate in your home, you’ll want to be sure you acquire the most energy-efficient water heater your budget will allow. Continue reading to find out which hot water system is right for you.

Solar 

A solar hot water system is made up of solar panels and a hot water storage tank. Thermosiphon systems can be divided into roof-mounted solar panels and storage tanks, and pumped or split systems. To allow for additional storage on days with less sunlight, you’d need a somewhat larger tank with Gas and Electric HWS. If you need it, most tanks come with a gas or electric booster. In addition, flat solar panels or evacuated tubes can be used. The evacuated tubes are much more functional and take up less space, but they are more expensive upfront.

Gas and Electric Hot Water Systems 

Hot Water Storage Systems

The most popular hot water system found in Australian households is a storage hot water system, which is also the cheapest to buy. Heating the water in the tank and storing it is how storage hot water systems work. They can be kept in laundry rooms, cupboards, beneath the stairs, or even outside.

Depending on the fuel available in your location, storage hot water systems are available in gas or electric. That will be determined according to whatever option is best for you. You can always use LPG gas if natural gas isn’t available in your location.

When it comes to water heating, gas is more efficient than electricity. Gas is not only less expensive, but it also heats water faster than electricity. The gas heat is instant, comparable to that of a gas stove, while the electric storage system takes time to achieve the desired temperature, similar to a kettle. Storage hot water systems are the most popular form of a hot water system in Australia because they are simple to install, provide instantaneous hot water from the tap, and require little maintenance.

Enjoy the benefits of having these convenient to use appliances in your house, from cost savings to maintenance. For a gas hot water system, contact Ipswich Hot Water today!

Posted on

Possible Causes and Remedies for Discolouration from your Hot Water System

One of the most staggering human achievements of all time is having clean, hot water on demand. We’ve become accustomed to expecting clean water from our taps whenever we turn them on. When we receive discoloured water though, we know something is wrong, and you need to hire plumbing services in Brisbane. We’ll go over a few common reasons and solutions for discoloured water from your hot water system.

Discoloured Hot Water: Causes and Solutions

It can be unsettling to switch on the hot water in your house and find discoloured water pouring out. That said, this issue isn’t going to uproot your life completely. While discoloured water from your hot water system isn’t ideal, it’s no cause for alarm. As it turns out, there are many typical causes for this problem, most of which are pretty safe, albeit inconvenient. Let’s take a look at some of the most typical plumbing issues that cause discolouration in your hot water supply.

1) Contaminant Accumulation — Contaminant buildup is the most common cause of discoloured hot water in your house or business. Minerals and sediment can build up inside your water heater tank over time. Contaminants stick to pipes when things settle at the bottom of your tank, discolouring the hot water sent to the remainder of your house. As a result, not only will your water change colour, but it will also call into question the efficacy of the entire system.

Solution: Consider having your water heater flushed by a plumber. You’ll need to empty your tank, wash the system, and then reinstall the unit.

2) Rusty Pipes – In the same way that materials can adhere to the inside of your water heater, rust can attach to your network of pipes. Corrosion and rust on pipework can cause discoloured hot water. Furthermore, they will degrade with time, just like your pipes. While most current piping solutions are built to endure an extended period, older homes may not have the same level of plumbing quality.

Solution: If your old pipes have rusted and are showing signs of corrosion, have them replaced.

Ipswich Hot Water Solutions

Ipswich Hot Water has a team of experts who can assist you with hot water solutions. In addition, our plumbing services in Brisbane have been helping customers make the most of their plumbing and hot water systems. So give us a call right now to cure all of your hot water issues!

Posted on

Heat Pump Repair and Services in Brisbane

Heat pumps are machines that transport heat from one position to another using electricity or other energy sources. Unlike other heating, ventilation, and air conditioning systems, heat pumps do not always generate heat. Instead, their main goal is to transfer heat to maintain the temperatures in the pump without consuming excessive amounts of energy. Considering the value of heat pumps, it is important that they are cleaned and maintained regularly. After all, waiting until they show signs of failure before cleaning them can cost you a lot more than just washing and maintaining them frequently.

Heat Pump Cleaning and Maintenance

It would be best to clean a heat pump’s condenser coil repeatedly, as it is a vital part. Maximum heat transfer, economical energy consumption, good indoor comfort and air quality, and extended service life can all be achieved with clean condenser coils. When cleaning the condenser coils, make sure the heat pump is switched off completely. Remove any impediments from the area around the condenser as well. After disassembling the condenser coils, clean them using a condenser coil cleaner or a water and soap solution. If you notice any bent condenser fins, use a fin comb to straighten them out. Once it has been washed and dried, you must reinstall the top grille and heat pump cover. Apart from the condenser coils, you should clean the vents and change the system air filter after 1 to 2 months.

Heat Pump Repairs and Services

When you hire a professional to do routine checks, repairs, and preventative maintenance on your heat pump, you can expect to receive hot water heater service that will considerably enhance its condition. The overall examination of the heat pump would be one of the first services they would do. Leaks, damages, dust, and other flaws are checked on filters, ducts, blowers, cables, indoor coil, bearings, motors and other components. They will begin repairing the heat pump when they have analysed everything that is wrong with it.

Our technician will clean the drain pan and indoor coil, clean and flush the drain line to sealing any duct leaks, replace damaged wirings, repair refrigerant leaks, and seal lubricates motors and bearings. Finally, evaluate the belts, condition system discharge pressure, thermostat, and so much more.

These are just a few of the repairs and services you can expect when a professional inspects your heat pump. Don’t hesitate to contact Ipswich Hot Water today if your heat pump requires repairs or maintenance.